• Universities & Agencies

Launch lock for DLR’s Cube1G laser communication terminal

DLR selected two Dcubed nD3PP Nano Pin Pullers as the launch lock for the Coarse Pointing Assembly of its Cube1G laser communication terminal.

DLR Cube1G laser communication terminal with its Coarse Pointing Assembly, mounted on an optical test bench

IndustryUniversities & Agencies
ApplicationLaunch lock for a Coarse Pointing Assembly
Mission TypeIn-orbit demonstrator (SeRANIS project)

01 · Challenge

Holding a pointing assembly stationary through launch

DLR has been developing Cube1G, a laser communication terminal for small satellites and CubeSats that provides bidirectional optical communication at up to 1 Gbit/s.

Its Coarse Pointing Assembly (CPA) steers the laser beams independently of the platform’s attitude and moves freely in azimuth and elevation, but it must be kept stationary during launch. Two nD3PP were selected as a launch lock that is released in the commissioning phase in space.

The CPA enables parallel operation and communication with the satellite.

02 · Solution

On-site support resolved a galling issue

During qualification for the SeRANIS in-orbit demonstrator, high vibration loads were challenging for the design, and an nD3PP got stuck after vibration testing.

SeRANIS stands for Seamless Radio Access Networks for Internet of Space.

A Dcubed Customer Solutions Engineer went on site at DLR and identified the cause as a galling material combination between the pin and its socket. The socket was redesigned using a material combination suggested by Dcubed, and the payload was successfully shaker-qualified two weeks later.

  • Two nD3PP as launch lock for the CPA
  • Root cause identified on site: galling between pin and socket
  • Socket redesigned with a different material combination

03 · Result

Shaker qualification passed and a flawless Cube1G payload

Dcubed developed solutions together with DLR engineers. The flexible, responsive support was one key to the successful development, alongside the nD3PP’s form factor, compact design and short lead time.

Customer Voice

The collaboration with Dcubed led to a streamlined, efficient and reliable CPA design. The small form factor of the Pin Puller, the short lead times and the support during trouble shooting helped throughout all phases of the project leading to a flawless Cube1G payload.
Portrait of Lukas Rodeck, Mechanical Engineer at DLRLukas RodeckMechanical Engineer · DLR
German Aerospace Center (DLR) logo

About the Customer

German Aerospace Center (DLR)

The German Aerospace Center (DLR) is the aerospace research center of the Federal Republic of Germany, with over 11,000 employees working in 54 institutes and facilities on 30 sites. Cube1G was developed in the Optical Satellite Links department of its Institute of Communications and Navigation. Its research and development work in aeronautics, space, energy, transport and security is integrated into national and international co-operations. The DLR Institute of Communications and Navigation is dedicated to mission-oriented research in selected areas of communications and navigation. It currently employs around 255 staff, including about 190 scientists, at the locations Oberpfaffenhofen, Neustrelitz and Aachen-Merzbrück.

Visit website ↗

Your Next Mission

Ready to build your next mission?

Tell us what you’re building and our engineering team will help you find the right solution.

Close-up of a solar array with dark solar cells, orange flexible circuit traces and a black mounting ring with a central hole